Windows Desktop App · Siemens S7

AI-powered diagnostics
for Siemens S7 PLCs

The tool your engineers wish they already had.

Download for Windows

Early Access — free through Mar 31, 2027 · then $29/mo or $249/yr

No PLC on hand? The app includes a built-in Demo Mode — explore every feature, AI Agent included, with a simulated PLC and TIA Portal project.

Read the docs →

Three ways in. Complete visibility.

S7 PLC Buddy bridges your running PLC and your TIA Portal project in a single interface — pick the PLC connection method that fits your network, and add TIA Portal if you want it.

S7 WebServer API

Connect over your plant network via the Siemens S7 WebServer API. Real-time diagnostic buffer, live tag values, alarm management — all without TIA Portal open or installed.

Requires: S7 PLC with WebServer enabled

OPC UA

Connect over OPC UA when your plant disables the WebServer for IEC 62443 hardening. Live tag values, CPU status, and full AI Agent support — the interface Siemens designed for locked-down networks.

Requires: S7-1500 with OPC UA server enabled

TIA Portal V21 Integration

Connect to an open TIA Portal V21 project on the same machine. Browse block source code, inspect hardware configuration, write and change Ladder and SCL blocks, and migrate whole Studio 5000 projects to native Ladder with AI assistance.

Requires: TIA Portal V21 installed

Don't have a PLC or TIA Portal on hand right now? Pick Demo Mode in Settings instead — a simulated PLC and TIA Portal project, no credentials or setup required.

From Studio 5000 to native TIA Portal Ladder

Moving a machine from Allen-Bradley to Siemens usually means weeks of retyping logic rung by rung. Give the AI Agent an .L5X export of the controller and it rebuilds the project in TIA Portal as real Ladder, not a pile of SCL.

Rebuilt as a project, not a file

Data types, Add-On Instructions as function blocks, instance data blocks, the controller tags, motion axes, PID loops, and every routine as its own block that calls the others the way the original did. The agent imports step by step and stops at the first failure.

Every rung checked against its source

Each generated block is compared with the rung it came from. On three controller exports the tool had never seen, 77% to 90% of the rungs became real Ladder on the first pass, and the largest one (1,566 rungs, 124 routines) imported into TIA Portal with no compile errors.

The agent finishes the rest, and asks

What the translator cannot do becomes a clearly labelled placeholder with the original rung attached. The agent works through them from a tracked list, using patterns that were compiled in TIA Portal, and asks you whenever the answer depends on your machine.

Clear about what stays yours

Messages to other devices, GuardLogix safety code, PID gains and the real I/O addresses are listed for you to decide, and every assumption the tool made is written down in a review report.

A clean compile and a matching structure are not proof that the machine will behave the same. Review the assumptions the migration lists, replace the placeholder I/O addresses, and test on a simulator before a real CPU. Read how it works in the docs.

Built for networks that can't reach the internet

Combine OPC UA with a local AI provider and S7 PLC Buddy never has to leave your plant network — not for the PLC connection, not for the AI Agent.

PLC connection stays on-network

Connect over OPC UA instead of the WebServer API — the interface Siemens designed for IEC 62443-hardened plants. No internet access required for diagnostics, tags, or the dashboard.

AI Agent stays on-network too

Point the AI Agent at a local Ollama instance instead of a cloud API. Your conversations, tag values, and diagnostic data never leave your machine or network.

Everything you need on site

Built for the plant floor. No bloat, no unnecessary steps.

Health Dashboard

CPU operating status and the full diagnostic buffer with human-readable event text, auto-refreshed every 5 seconds. Export to CSV for reporting or incident records.

Data Browser & Watchlist

Navigate your PLC's full tag tree. Add any variable to a persistent watchlist for live value monitoring — survives app restarts, picks up where you left off.

AI Agent

Ask about your PLC in plain language. The agent reads live data, browses diagnostic events, and returns answers — not raw numbers. Bring your own provider: Claude, OpenAI, OpenRouter, or a fully local Ollama model.

Alarm Management

Browse active and historical alarms with timestamps and descriptions. Acknowledge individual alarms or all at once — directly from the app, no TIA Portal needed.

Ask your PLC in plain language

The AI Agent reads live diagnostic data, browses tag values, and explains what it finds — no custom queries, no scripting. Just ask.

  • ✓ Diagnose faults from natural language descriptions
  • ✓ Read and explain TIA Portal block source code
  • ✓ Migrate Studio 5000 projects to native TIA Portal Ladder, or Ladder networks to SCL with explanations
  • ✓ Export full chat history for documentation

Up and running in minutes

01

Connect

Choose WebServer or OPC UA and enter your PLC's address in Settings, or pick Demo Mode if you don't have one handy. S7 PLC Buddy handles authentication, keeps the session alive, and optionally connects to an open TIA Portal project.

02

Explore

Browse the diagnostic buffer, monitor live tag values, check active alarms. Everything refreshes automatically — no manual polling required.

03

Ask

Open the AI Agent and type your question. It pulls the data it needs, reasons over it, and gives you an answer in plain language.

Simple, engineer-friendly pricing

S7 PLC Buddy is in Early Access — try every feature free through March 31, 2027. No credit card required.

Monthly

$29/ month

 

  • All features unlocked
  • AI Agent with Claude
  • TIA Portal V21 integration
  • Upgrades to future versions
  • Cancel anytime
Start free trial

System requirements

Base requirements (all features)

OSWindows 10 / Windows 11 (64-bit)
PLCS7-1200 and S7-1500 with WebServer enabled, or S7-1500 with OPC UA enabled
NetworkIP-accessible connection to the PLC (PROFINET or Ethernet)
AI AgentAn API key for Anthropic, OpenAI, or OpenRouter (or run Ollama locally — no key, no cloud account, no internet needed)

TIA Portal features (optional)

TIA PortalSiemens TIA Portal V21 installed on the same machine
LicenseAny TIA Portal edition that includes Step 7 (Basic, Professional, or higher)

Frequently asked questions

Which Siemens PLCs are compatible?

Any S7 PLC with the WebServer function enabled: S7-1200 and S7-1500 that supports the WebServer API (CPU firmware V2.0 or later for S7-1500). The WebServer must be activated in TIA Portal or STEP 7 and the PLC must be reachable over IP. If your plant disables the WebServer for security reasons, S7-1500 CPUs are also supported over OPC UA instead.

Do I need a real PLC to try S7 PLC Buddy?

No. Select Demo Mode in Settings and the app connects to a simulated PLC and TIA Portal project in seconds, no hardware, no network access, no TIA Portal license required. It replays a real fault scenario end to end: browse live diagnostic and alarm data, then ask the AI Agent to diagnose it or even draft and apply a code fix. Demo Mode is free and unlimited, including the AI Agent, so you can try the full experience before starting a trial.

Do I need TIA Portal installed to use S7 PLC Buddy?

No. TIA Portal is completely optional. The dashboard, data browser, alarm management, and AI Agent all work with a direct PLC connection only. TIA Portal V21 integration unlocks additional capabilities: browsing block source code, reading hardware configuration, and Ladder-to-SCL migration assistance.

Can it migrate my Allen-Bradley (Studio 5000) program to TIA Portal?

Yes, with limits. Export the whole controller as an .L5X file and ask the AI Agent to migrate it into the open TIA Portal project. It rebuilds the data types, Add-On Instructions, tags and routines as native Ladder, checks each generated block against the rungs it came from, and marks what it cannot translate as placeholders that the agent then works through with you. On the controller exports we tested, between about two thirds and nine tenths of the rungs became Ladder on the first pass. Some instructions have no automatic equivalent (for example messages to other devices, GuardLogix safety code and PID gains), and a program that compiles is not proof that the machine behaves the same, so review the assumptions the tool lists and test on a simulator before a real CPU.

Is my PLC data sent to the cloud?

No. PLC data stays on your local network regardless of connection method (WebServer or OPC UA). By default the AI Agent sends conversation text to your chosen provider's API (Anthropic, OpenAI, or OpenRouter) — raw memory blocks and tag values are not transmitted unless you explicitly include them in your message. If you need the AI Agent to stay fully on-network too, point it at a local Ollama instance instead; nothing leaves your machine or network in that case. API keys are encrypted and stored locally.

Which TIA Portal version is required?

TIA Portal V21. The integration uses the TIA Portal Openness API, which is version-specific. V21 must be installed on the same Windows machine running S7 PLC Buddy. Support for other versions is on the roadmap.

Does it work offline or on an isolated plant network?

The PLC connection features (dashboard, data browser, alarms) work fully offline on your plant network — no internet required, whether you connect via the WebServer API or OPC UA. The AI Agent only needs an outbound internet connection if you use a cloud provider (Anthropic, OpenAI, or OpenRouter); point it at a local Ollama instance instead and the AI Agent works fully offline too. For a fully air-gapped setup with a cloud AI provider, you can run S7 PLC Buddy on a laptop bridged between the plant network and an internet connection.

How do I get an Anthropic API key?

Create a free account at console.anthropic.com. Anthropic's API is pay-as-you-go — typical diagnostic sessions cost a few cents. Enter your key once in S7 PLC Buddy's Settings. It is encrypted and stored locally; it is never transmitted except to authenticate directly with Anthropic's API.

Can I use a different AI provider, or run models locally?

Yes. Settings has a Model Provider toggle: Anthropic Claude, or any OpenAI-compatible endpoint, including OpenAI directly, OpenRouter for access to a wide range of hosted models, or Ollama for running models fully on your own machine or network with no cloud dependency and no API key required. You can switch providers at any time without losing your conversation history.

What happens after the 14-day trial ends?

After the trial, the app moves to free mode: PLC connection, dashboard, and data browser remain available. The AI Agent and TIA Portal integration require a Pro license for a real PLC connection, but Demo Mode stays free and unlimited, including the AI Agent, so you can keep exploring with simulated data. All your settings, watchlists, and conversation history are preserved — nothing is lost when the trial ends or when you later activate a license.

Can I export diagnostic data for reporting?

Yes. The diagnostic buffer can be exported to CSV with a single click — columns include ISO 8601 timestamp, event status, human-readable description, and event reference. AI Agent conversations can be exported as Markdown files.

Ready to try it?

Connect to your first PLC in minutes. No credit card required for the trial.

Download for Windows

Early Access — free through Mar 31, 2027  ·  then $29/mo or $249/yr  ·  Windows 10/11 (64-bit)